Matthew Walker Knot
This is another decorative knot that requires separating the rope you're working with into three strands.
1 Begin the Matthew Walker Knot by making a Wall Knot, tucking each end up through the next bight.
2 Continue by making another tuck.
3 Snug down by pulling each of the strands repeatedly.
Another way to tie the Matthew Walker Knot is to lay the strands in successive Overhand Knots.
1 Use one strand to make an Overhand Knot.
2 Continue making Overhand Knots with each consecutive strand.
As you pull on the strands to tighten the knot, make sure you do it gradually and evenly.